20kV Cold Shrink Cable Accessories (12/20kV)

Pre-expanded cold shrink terminations and joints for 12/20kV MV networks, built around IEC dimensions for European and Middle East projects.

20kV cold shrink accessories are specified for 12/20kV systems -- the IEC voltage designation used across European utilities, Gulf-grid projects and most international EPC work. The parts follow the same pre-expanded, core-pull principle as the 15kV line, but are dimensioned and tested for the higher rated stress of a 20kV class network.

The buying decision here is usually made against a cable schedule and an IEC type-test requirement rather than a single catalogue number. RMU and switchgear OEMs, solar EPC contractors and utility distributors tend to qualify one body family across a conductor range and then manage stock by cable OD. We support that with an XLPE termination selector and consistent kit contents so a missing component never stops a joint on site.

Technical specifications

Applications by industry

• 12/20kV RMU and switchgear feeder terminations
• Solar farm collection and substation cable joints
• European utility MV distribution terminations
• Infrastructure and industrial plant 20kV spurs
• Middle East EPC medium-voltage cable sealing
• Marine and offshore platform MV cable joints

Why cold shrink at 20kV (IEC networks)

On IEC 12/20kV systems the stress-control cone has to be right or partial discharge starts early in the joint life. A cold-shrink body carries that cone as a moulded feature, which removes the field-assembled step that heat-shrink and tape methods depend on. For EPC and OEM buyers the attraction is repeatability: the same body seats the same way regardless of which crew installs it, and there is no flame in a switchroom or cable basement.

Stress cone and kit completeness review

The stress cone is fixed in the body, but the joint still needs correct cable preparation: screen cutoff length, semi-con finish and a clean weather seal. We size bodies by cable OD across the conductor range you carry, and pack each kit with the same component set so a termination and a straight joint on the same cable do not need two different orders.

Inspection and traceability

We state the control plan with you. Batch traceability links the raw rubber lot to the finished part and the test record.

• First-article inspection (FAI) against your cable schedule
• In-process dimensional checks at every station
• Batch certificate of conformance (COA) on request
• Lot traceability to incoming material certificate
• AC withstand and partial-discharge testing available on request

Related components

Common questions