Mylar Shrink Tubing | Mylar Tubings | Polyester Tubes

Mylar TUBING/Polyester Tubes/Mylar Shrink Tubing/Spiral Wrap Tubing/Mylar Cable Sleeving /Mylar Tube Roll

Description

Mylar Tubings | Polyester Tubes | Mylar Shrink Tubing

Heat Shrinkable Mylar TUBING

Mylar tubings|Polyester Tubes|Mylar Shrink Tubing General Description: A superior, high dielectric insulating tubing that is shrinkable as much as 50% in order to provide an immovable, tight fit. Temperature requirements are approximately 90°C. for shrinking purposes with a heat cycle as short as 1 second. Maybe shrunk by various methods such as heat guns, boil-ing water, electrical coil heaters, or in ovens.

Mylar Tubings | Polyester Tubes | Mylar Shrink Tubing

Advantages

Heat-shrinkable Mylar? tubing has a dielectric strength far exceeding other shrinkable materials. It is extremely tough and forms an excellent mechanical barrier. It can be used at both low and high temperatures. It is moisture & vapor resistant and is unaffected by oils, greases, and volatile aromatics.

Application

Mylar tubings | Polyester Tubes | Mylar Shrink Tubing Mostly used for welding point, contact, loop, transformer, motor, electrical wire, electric heating component, capacitance, telephony relay, high voltage transformer, temperature resistance and insulation, mechanism protection. Capacitor covers, RF & IF coil insulation, varnish masking, roller covers, lead binding & holding, battery covers, color coding, insulation between coils, sleeving insulation over wire leads, protective coverings.

Mylar tubings | Polyester Tubes Specification
Inside diameter:0.026 inch ~ 2 inch (0.66mm~50.8mm)
Length:0.062 inch ~ 48 inch (1.57mm~1219mm)
Wall Thickness:0.001 inch ~ 0.03 inch (0.0254mm~0.76mm)
Color:Transparent,color,stripe for Mylar tubings|Polyester Tubes|Mylar Shrink Tubing